| GLIDEFIT |
|
Slides in and stays in during handling and assembly.
See the Glidefit Numbering System
Slides
in
Decrease the force
(up to 50% less) needed to insert the pile into the extrusion - increase the
productivity of weather-stripping installation.
Locks in
- doesn't fall out
Just enough
friction for positive locking in the extrusion. Will not fall out when
operator moves extrusion to next station.
Fin
height above the pile
A fin height
.020" above the pile increases window performance - higher fin (not always
available on other slide-in weatherseal products) can reduce air infiltration by
as much as 20% over standard fin products.
New, invisible
joints provide a continuous length of weather-stripping. Material feeds
off reels straight, stopping hang-ups in manufacturing.
Part Number Example: 25018745WHGF
| 1 | 2 | 3 | 4 | 5 | 6 |
| 25 | 0187 | 45 | WH | GF | ------- |
| Pile Height | Base Width | Density | Color | Product Type | Special Instructions |
*Pile Heights start at .130" to .500" in .010" increments For Example…
| 1. Pile Height | 2. Base Width | 3. Density | 4. Color | 5. Product Type | 6. Special Instructions | ||||||||
| Pile Height | Code | Base Width | Code | Pics | Ends | Density | Code | Color | Code | Product | Code | Instruction | Code |
| .130" | 13 | .187" | 0187 | 28 | 2 | Standard | 30 | Gray | GY | GlideFit | GF | Special instructions assigned at factory | S |
| .200" | 20 | ???? | Cust. Spec. | 28 | 2 | Premium | 45 | Black | BK | Quiet Fin Black w/GlideFit | QBGF | ||
| .250" | 25 | White | WH | Quiet Fin White w/GlideFit | QWGF | ||||||||
| .500" | 50 | Beige | BG | ||||||||||